Concrete Water Reducing Admixture for Ready Mixed Concrete

• After-sales Service: Technical Service
• Type: water-reducing admixture
• appearance: Liquid
• Concentration: 50%
• Use: Concrete Admixtures
• Transport Package: IBC Tank
• Model NO.: YS-GC
• Specification: 1000kgs/IBC
• Origin: China
• HS Code: 38244010
• Production Capacity: 50000tons/Month

Product Description

Concrete water reducing admixture for ready mixed concrete

Polycarboxylate Superplasticizer PCE is a new generation high performance superplasticizer based on polycarboxylate technology. With featured advantages of high water reduction, excellent slump retention ability and low alkali content, it can be widely used in premix of common concrete, gushing concrete and hydro concrete. It's also suitable for engineering projects under various weathers and especially a preferred choice in hot climate area.


2.Features and Benefits
1.Excellent compatibility with various types of cements.
2.High water reducing rate, low dosage, and low slump loss.
3.Low chloride and alkali content, no corrosion to steel-bar.
4.High stability: no precipitation at low temperature.
5.Environmental friendly and nontoxic.
6.Cement paste fluidity more than 250mm,with a dosage of 0.1%
7.Short delivery time and good sales-after service
3.Advantage
1.low dosage
2.high water reducing rate
3.low shrink rate
4.improves the liquidity of concrete greatly
5.keep long time construction performance, as well as ameliorates its peace ability and physics performance

High water-reducing performance	High initial and ultimate strength.
High flowability	Ease of placing and compaction.No separation.
Superior compression performance	No retempering. Ease of point construction
Low shrinkage and creep	Improves dimensional stability. Reduces risk of cracks
Good workability	Excellent appearance. Self compacted concrete.

4.Application:
1.Used in high performance and high strength concrete with high construction requirements.
2.Used in high slump concrete,ready minxed concrete,and pumping concrete.
3.Used in the concrete of high buildings,hydraulic engineering,transport system,port engineering,and municipal engineering etc.
4.Used in other high-lift concrete for specific building.








5.Uses and Cautions

1. A recommended dosage is 0.5-1.2%.Actual dosage should be determined by several trials according to concrete strength grade.
2. It is required that the tolerance must be less than 1.0%.
3. Concrete test must be carried out before utilization.
4. This product is forbidden to be mixed with naphthalene superplasticizer.
5. Experiments must be done when it is used with other admixtures.